Skip to content
R. de Siebenthal & Fils SAMachining workshop · Bex · since 1932

Services

SKF regional dealer

For more than 50 years, alongside machining, we have sold bearings of every type and advised on their use and fitting: ball, roller and needle bearings, housings, spherical plain bearings, GLYCODUR plain bearings, fitting and dismounting sleeves, lock washers, balls, rollers, needles, and SKF fitting and inspection tools.

Bearing
Bearing
SKF+41 24 463 22 28

Lead times

Bearings not held in stock

  1. Express

    Delivered the same afternoon for orders before 11:30

  2. Standard

    Next morning, for standard bearings from Swiss stock

  3. 3 days

    All standard European production from the SKF distribution centre in Belgium

  4. 1 week or more

    Depending on type, tolerances or stock shortages; replacement possible with another European make

Lead times are indicative, subject to prior sale.

Always in stock

Bearings and accessories

  • Single-row deep groove ball bearings

    • 600
    • 6000
    • 6200
    • 6300

    Bore 3 to 60 mm; open, shielded one side (Z), both sides (2Z) or sealed both sides (2RS)

  • Thrust ball bearings

    • 51000

  • GLYCODUR plain bearings

    • F
    • PCM

  • Lock nuts

    • KM

  • Lock washers

    • MB

  • SIMMERING shaft seals

    For shafts from 8 to 90 mm

  • SEEGER circlips

    For shafts from 3 to 90 mm and bores from 10 to 90 mm

For emergencies

Fasteners and bar stock

  • Fasteners

    8.8 and 12.9 steel and stainless steel, from M1.6 to M16: bolts, screws, nuts, washers

  • Pins

    Hardened, taper and spring pins

  • Keys and grease nipples

  • HELICOIL thread inserts

2.5 t

approx., of bar stock, round and hexagonal bars, flats and tubes, for our own use and for emergencies

  • Steels and cast irons

    • S235
    • S355
    • C45E
    • ETG100
    • 34CrNiMo6
    • 30CrNiMo8
    • 42CrMo4
    • 16MnCr5
    • 17CrNiMo6
    • 9SMnPb36
    • 100Cr6
    • 1.2510
    • 1.2380
    • 1.2343
    • 1.4057
    • 1.4301
    • 1.4305
    • 1.4435
    • 1.4542
    • 1.4021
    • 1.4034
    • 1.4122
    • EN-GJL-250

  • Copper, brass and bronzes

    • CuSn7Zn4Pb7
    • CuAl10Ni5Fe4
    • CuZn39Pb3
    • CuSn8
    • Cu ETP

  • Aluminium and titanium

    • AA6082
    • AA5083
    • AA5754
    • AA6012
    • AA6061
    • AA7075
    • AA7010
    • AA7022
    • Titanium Gr5 3.7165
    • Titanium Gr2 3.7035

  • Plastics

    • PVC
    • PP
    • PC
    • PA
    • PE
    • POM
    • HD-PE
    • PMMA
    • PTFE
    • PVDF
    • PI
    • PPS
    • PEEK

  • In very small quantities

    • STUMATIT
    • MACOR
    • Hastelloy
    • Tantalum
    • Nickel